Flashing; Direction Indicators - Alfa Romeo 147 Owner's Manual

Table of Contents

Advertisement

When the dipped beam headlights and the
fog lamps are switched on, the outer light
control unit (integrated in the Body Com-
puter) works according to the following log-
ics:
– turning on the main beams, the dipped
beams turn off while the fog lamps stay on,
when restoring the starting condition at
dipped beam setting;
or
– turning on the main beams, the fog
lamps turn off and then turn on again au-
tomatically as the main beams are switched
off.
Therefore, in the event of Body Comput-
er replacement, the outer light operating log-
ic may be different.
fig. 61
Flashing (fig. 61)
The headlights are flashed pulling the lever
towards the steering wheel (instable posi-
tion) regardless of the position of the
knurled ring. The 1 warning light on the
cluster will come on at the same time.
IMPORTANT Only the main-beam lights
are flashed. To avoid penalties follow local
regulations.

Direction indicators

(fig. 62)
Regardless of the position of the knurled
ring, moving the lever to the stable position
will:
up, position (1) - engage the right-hand
direction indicators.
down, position (2) - engage the left-hand
direction indicators.
A0A0067m
fig. 62
One of the warning lights (R or E) will
come on on the instrument cluster at the
same time.
The lever is returned to its position auto-
matically and the indicators are switched off
when the steering wheel is straightened.
IMPORTANT If you wish to signal a
rapid change of direction involving only a
minimal movement of the steering wheel,
the lever can be removed up or down with-
out it clicking (unstable position). When re-
leased, the lever will return to its home po-
sition.
A0A0068m
fig. 63
A0A0067m
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alfa 147

Table of Contents