Number Plate Lights; Additional Braking Light - Alfa Romeo 147 Owner's Manual

– Disconnect the electric connector (C).
– Slacken the screw (D), and remove the
bulb holder.
– Remove the bulb to be changed push-
ing gently and turning counterclockwise:
(E) - bulb for rear sidelight/braking light.
(F) - bulb for rear direction indicator.
– Replace the bulb, then refit the bulb
holder and tighten the screw (D).
– Re-connect the electric connector (C).
– Refit the light unit on the body tightening
the screws (B).
– Close the preformed trim (A).
fig. 33

NUMBER PLATE LIGHTS

(fig. 34)
To change the bulbs, proceed as follows:
– Work on the transparent cover frame,
in the point shown by the arrow to compress
the catch (B). Free the opposite end and re-
move the unit.
– Turn the bulb holder counter-clockwise (A)
and remove it from the transparent cover.
– Remove the snap-fitted bulb and replace it.
– Insert the bulb holder (A) in the trans-
parent cover then refit the unit checking that
the catch clicks into place (B).
A0A0170m
fig. 34

ADDITIONAL BRAKING LIGHT

(THIRD STOP) (fig. 35-36)
To change the bulbs, proceeed as follows:
– Open the tailgate, slacken the screws
(A) then disconnect the electric connec-
tion (B).
– Remove the transparent cover- bulb
holder (C) from the support (D).
– Working on the side catches (E), release
the bulb holder.
– Remove the bulb to be changed.
A0A0171m
fig. 35
A0A0172m
217