System Activation - Alfa Romeo 147 Owner's Manual

Table of Contents

Advertisement

With gearshift to CITY gears can still be
shifted manually using the gearshift lever or
the steering wheel controls. Geashift stays
in CITY.
The gear engaged (fig. 129) is shown
on the display regardless of the mode se-
lected.
N = neutral;
1 = first gear;
2 = second gear;
3 = third gear;
4 = fourth gear;
5 = fifth gear;
R = reverse.
fig. 129
In the CITY mode the selected position is
shown.
A warning light connected with the corre-
sponding failure message ("GEARBOX FAIL-
URE") (fig. 130) and a buzzer attract the
attention of the driver in the event of a fault
of the Selespeed transmission.
A0A9017g
fig. 130

SYSTEM ACTIVATION

IMPORTANT Opening the driver's door
the Selespeed starts the hydraulic part of
the system to prepare it for when the en-
gine is started.
Turning the ignition key to MAR, all the
segments of the gear display (fig. 129),
the gearbox failure warning light (fig.
130) and the word CITY light up. After
about one second, the display indicates the
gear engaged (N, 1, 2, 3, 4, 5, R).
IMPORTANT If after 10 seconds the dis-
play segments do not display the gear en-
gaged or the failure warning light stays on,
turn the ignition key to STOP and wait for
the display to go off, then repeat the sys-
tem activation procedure. If the fault pre-
sists, contact Alfa Romeo Authorised Ser-
vices.
A0A9118g
115

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alfa 147

Table of Contents