Manual tuning
This allows manual station searching in the
chosen band.
Select the required frequency band and
then press briefly and repeatedly button N
or O to start searching in the chosen band.
Pressing one of the buttons N or O longer
obtains fast forward searching, which is
stopped when the button is released.
A-STORE function
(automatic station storage)
To switch on the A-STORE function, keep
button FM
pressed until receiving the con-
AS
firmation beep. With this function the ra-
dio automatically stores the six stations with
the strongest signal in decreasing order of
intensity of the FMT frequency band.
IMPORTANT Activating the A-STORE
function cancels the stations stored previ-
ously in the FMT band.
If the TA function is on (traffic information),
only the stations that send traffic informa-
tion will be stored.
During automatic storage the display
shows "A-STORE".
To interrupt A-STORE press button FM
again: the radio will automatically tune to
the station heard before activation of the Au-
toSTore function.
At the end of the A-STORE function the ra-
dio automatically tunes on the first preset
station in the FMT band stored on preset but-
ton 1.
On buttons numbered from 1 to 6, the sta-
tions are automatically stored that give a
strong signal in that moment in the present
band.
Activating the A-STORE function in MW or
LW bands will automatically select the FMT
band where the function is then run.
IMPORTANT Sometimes the A-STORE
function is unable to find 6 stations with a
strong signal. In this case the previous sta-
tions will be stored on the free preset but-
tons.
AS
161