Connection Of Other Telephones; Clearing The System; Connection Priority; Managing Telephone Calls - Alfa Romeo 147 Owner's Manual

During the connection procedure,
the cellular telephone display will
show a message to enter the con-
nection code; enter code "1234"
and then confirm.
Afterwards the connection will be carried out
automatically, provided that the two sets are
at very close distance. A beep will communi-
cate that the connection has been established.
Below are some examples of the operations
to make for the first connection on some of
the most known cellular telephones.
IMPORTANT The system works only
when the ignition key is turned to MAR. The
connecting procedure must be carried out on-
ly the first time the cellular phone is matched
to the system. If at the first connection, the
handsfree system does not say "Please, pair
device", reset the system pressing (A) and
(B) simultaneously for at least 2 seconds.
178
CONNECTION OF OTHER
TELEPHONES
To connect another cellular phone, repeat
the procedure carried out for the first con-
nection, up to a maximum of 3 cellular
phones. For the connection of other cellular
phones it will be necessary to clear the sys-
tem (see following paragraph).

CLEARING THE SYSTEM

To clear the system memory press the green
(A) and red (B) buttons for at least 2 sec-
onds.
IMPORTANT Clearing the memory im-
plies the disconnection of all the telephones
memorised, the clearing of all the numbers
stored in the memory of the handsfree sys-
tem and then calls for a new connection pro-
cedure to use the system again.

CONNECTION PRIORITY

If at least 2 cellular phones have been con-
nected, the first one to be connected (in time)
will be that with the highest priority. It means
that when getting inside the car, with the sys-
tem active (ignition key at MAR), it will
be the first one to be searched and, if present,
connected. If it is not found, the system will
search for the other cellular phones.

MANAGING TELEPHONE CALLS

Below are the general procedures for man-
aging telephone calls, generally applied to all
cellular telephones.
To make a telephone call
manually
– Dial the required number on the cellular
telephone keyboard
– press enter on the phone to start the tele-
phone call
– the telephone call will be automatically
switched over to the handsfree mode (on
some cellular telephone models it is neces-
sary to press the green button (A) to
switchover to the handsfree mode).