Preset Buttons; Storing The Last Station Listened To; Automatic Tuning; Automatic Station Storing - Alfa Romeo MiTo 2015 Owner's Handbook Manual

Table of Contents

Advertisement

PRESET BUTTONS

The buttons numbered from 1 to 6 are used to set the following
preset stations:
❒ 18 in the FM band (6 in FM1, 6 in FM2, 6 in FMT or "FMA" (on
some versions));
❒ 12 in the MW band (6 in MW1, 6 in MW2).
To listen to a preset station, select the desired frequency band and
then briefly press the corresponding preset button (from 1 to 6).
By pressing the preset button for more than 2 seconds, the current
station will be stored.
The storing phase is confirmed by an acoustic signal.
STORING THE LAST STATION LISTENED
TO
The radio automatically stores the last station that was selected for
each reception band, which is then tuned into when the radio is
turned on or when the reception band is changed.

AUTOMATIC TUNING

Briefly press the
search for the next station that can be received in the selected
direction.
If the
or
button is pressed down longer, the fast search starts.
When the button is released, the tuner will stop on the next station
that can be received.
If the TA function (traffic alerts) is on, the tuner will only search for
stations that broadcast traffic news and alerts.
256
or
button to start the automatic tuning

MANUAL TUNING

This is used to manually search for stations in the preselected band.
Select the desired frequency band and then press the
button briefly and repeatedly to start to the search in the desired
direction.
If the
or
buttons are pressed longer, the fast search will start
and then stop when the button is released.

AUTOSTORE FUNCTION

(automatic station storing)

To activate the AutoSTore function, hold the FM AS button down
until an acoustic signal is heard. With this function, the radio
automatically stores the 6 stations with the strongest signal in
decreasing order on the FMA frequency band.
During the automatic storing process, the word "Autostore" flashes
on the display.
Press the FM AS button again to interrupt the AutoSTore function:
the radio will again tune into the station listened to before the
activation of the function.
When the AutoSTore function has finished, the radio will
automatically tune into the first preset station on the FMA band
stored on the preset side 1.
The stations that have a strong signal in the preselected band at
that moment, are then automatically stored on the buttons
numbered from 1 to 6.
or

Advertisement

Table of Contents
loading

Table of Contents