A-K5L Setup Menu; A-K5L Version Menu - Russound A-C68 Installation Manual

A-K5L Setup Menu

The A-K5L Setup menu is used to choose source names, check the version
number and perform a Factory Initialization of the A-C68 controller. The menu
is outlined in the diagram below.
To access the Setup menu, press and release the Setup button on the right
side of the keypad until "SrcNm" (source name) appears on the display. Press
the Source button to toggle through the menu options, and use the Volume
Up/Down buttons to scroll through the selections. Press the Power button to
enter a selection.
When finished, press and release the Setup button again.

A-K5L Version Menu

The A-K5L Version menu is used to view the current firmware version
installed on the A-K5L keypad. The menu is outlined in the diagram to the
right.
To access the Version Menu, press and release the Setup button on the right
side of the keypad until "KpVer" (Keypad Version) appears on the display. Press
the Power button to view the keypad version number.
When finished, press and release the Setup button again.
# OF
SOURCES
(#Srcs)
Russound A-C68 Installation Manual
A-K5L SETUP AND VERSION MENUS
KEYPAD
CONTROLLER
GAIN VERSION
(SrcNm)
(Gain) (CtVer)
(Src #) (Name?)
A-K5L Setup Menu
Hold
KEYPAD
DIAGNOSITCS
VERSION
(Diags)
(KpVer)
A-K5L Version Menu
FACT INIT
SETUP
(FInit)
MENU
No
Are you sure?
(Sure?)
Yes
WAIT
keypad
DONE
INSTALLER
MENU
33