Factory Initialization - Russound A-C68 Installation Manual

FACTORY INITIALIZATION PROCEDURE
The Factory Initialization procedure returns the controller to its factory
settings and sets all programming and settings back to factory default.
Press and HOLD Setup button
UNTIL
Ctrl ID (yellow) turns ON
Press and HOLD Setup button
UNTIL
Fact Init (orange) turns ON
5.
Aim A-SRC1 remote control at IR In
ON OFF ALL OFF SLEEP
ZONE
DISC
6. Press "ALL OFF" then "ON" (A-BUS zone commands, bottom of A-SRC1)
ALL
ON
OFF
Fact Init (orange) blinks SLOWLY TWICE
7.
8.
All LEDs turn OFF (for 3 seconds or less)
9. Source/Test (green) turns ON
Ctrl ID (yellow) turns ON
Fact Init (orange) turns ON
THEN
Cycle power on controller
10.
26
Controller Setup - Factory Initialization Procedure
Russound A-C68 Installation Manual
A-SRC1 Remote
Control buttons
ON OFF OFF ALL SLEEP
ZONE
DISC