A-C68 Front Panel; Programming Center - Russound A-C68 Installation Manual

The A-C68 front panel features a removable molded plastic cover that hides
the Programming Center buttons. The power switch has a push on/push off
The A-C68 front panel cover hides the Programming Center and keypad dip
switch settings. The Programming Center is used to perform the controller
setup and source setup procedures. These are explained in detail in the
Installer's section of this manual. The Programming Center button LEDs light
MAIN POWER SWITCH - Turns power on and off
STATUS LED - Indicates power on when illuminated
Russound A-C68 Installation Manual
action with a two-color LED (Status) indicator to the right. This LED is green
when the unit is active, and red when the unit is in standby mode.
REMOVABLE COVER - Covers the Programming Center
buttons on the controller
at different rates and in different colors during these procedures to indicate
programming steps. It also contains an IR receiver window for remote control
use during programming and RS-232 connector for firmware updates.
1 2 3 4 5 6 7 8
PROGRAMMING CENTER - Used to perform the controller setup
and source setup procedures
A-C68 CONTROLLER FRONT PANEL
5