Keypad Usage And Features; User Menu Settings - Russound CA4 Installation Manual

KEYpAd USAGE & FEATURES
CA4-KP User Menu
The User Menu allows the user to adjust the audio properties and features of
a particular zone. The audio features that can be adjusted are: Bass, Treble, and
Loudness. Additional features that are selectable are Source Grouping, and All
ON Participation. Source Grouping allows linked zones to listen to the same
source and follow any source changes on those linked zones. When All ON
participation is enabled, an All ON command will turn on any enabled zones
and allow the initiating keypad to act as the Master keypad and control the
source selection for all zones that are powered on.
To enter the User Menu, press and hold the Source button for 3 seconds
when the keypad is powered on. The Source windows will blink to indicate the
option ready for adjustment. Another 3-second press and hold of the Source
button (or a 9-second time-out) will return the keypad to regular operation.
The top left (Source 1) button will temporarily blink to indicate "Bass" is ready
for adjustment. Subsequent presses of the Source button will toggle through
Treble (Source 2), Loudness (Source 3), Source Grouping (Source 4) and All ON
Participation (all four Sources lit).
Once an option is selected, the Volume Up/Down buttons are used to adjust
settings. The volume indicator LEDs temporarily light to show the option
setting. A 3-second press and hold, or a 9-second time-out will return the
keypad to normal operation.
Setting Bass and Treble
1. Enter the User Menu.
2. Select Source 1 (upper left) for Bass or Source 2 (upper right) for Treble.
The windows will blink to indicate the option for adjustment.
3. Press the volume up or down to adjust the settings. The LEDs above the
volume up button will indicate the change. The middle LED will flash
when flat.
4. Either press the Source button to go to the next option or exit the User
Menu by a 3-second press of the source button or a time-out.
6
Press Volume Up or
Down buttons to
Russound CA4 System Installation Manual
Source window will blink to indicate the
option that is ready for adjustment
Bass
Loudness
adjust setting
Bass Setting Mode
Source 1 Source 2
Source 3 Source 4
Treble
Source Grouping
All Sources Lit
- All ON Participation
Hold Source button to
enter or exit User Menu
Press Source button to
cycle through the menu
options
Treble Setting Mode