Source Audio Input Connections; Source Ir Connections - Russound A-C68 Installation Manual

SOURCE AUDIO AND IR CONNECTIONS
Source Audio Connections
The A-C68 supports up to six audio sources. The source audio connections
are located on the back panel. Connect each source using quality RCA signal
cables. Connect the Left and Right Audio outputs from each source to the
corresponding "In" inputs on the A-C68 controller. Label each cable with the
name of the selected source and the source input number located on the A-
C68.

Source IR Connections

Each source component has a designated IR port on the back of the A-C68.
16
IR Emitter
Tuner
Russound A-C68 Installation Manual
This IR port is next to the source audio input connections.
1. Using an IR emitter (the Russound 845.1 is recommended) attach the end
of the emitter with the 1/8" plug to the IR emitter port next to the source
input.
2. Remove the adhesive back at the other end of the emitter and attach the
emitter over the source component's IR window.
3. In order to control this source component with IR, the source must be
selected at the keypad receiving the command.
RCA Cable
CD Changer
A-C68