Installing Quick Sink Adapter - Haier XQB60-91BF User Manual

XQB60-91BF MANUAL

Installing Quick Sink Adapter:

When installing quick sink faucet adapter to the faucet, follow the steps below:
For Outside Thread
Outside
Thread
Sink Faucet
Silver Faucet
Connector
Quick Sink
Faucet
Adapter
Rubber Washer
Washer
For Large Inside thread
A. Insert large size of rubber washer into the silver
faucet connector.
B. Connect the silver faucet connector into the
faucet.
C. Follow the steps D and E above.
10/22/01 11:42 AM Page 27
A. First remove the aerator from your faucet nozzle and
A
determine the size/type of the faucet.
B. Once you determine the size/type of the faucet,
place the proper size of rubber washer in silver
faucet connector.
C. Connect the silver faucet connector to the faucet.
D. Pull down and hold the collar on the quick sink
faucet adapter. Push it onto the faucet connector and
release the collar. The quick sink faucet adapter
should easily snap into place.
E. Insert rubber washer into the other end of the water
supply and connect to the water inlet valve on top of
the washing machine.
Faucet
Rubber Washer
Inlet Hole ("Y adapter" shown
for illustration only)
Hot and Cold Inlet Hose
B
Large
Inside
thread
Sink Faucet
Silver Faucet
Connector
Quick Sink
Faucet
Adapter
English
26