Haier XQB50-10 User Manual
Haier XQB50-10 User Manual

Haier XQB50-10 User Manual

Full automatic washing machine
Hide thumbs Also See for XQB50-10:

Advertisement

XQB50-10
Full Automatic Washing Machine
Please read this manual carefully before using.
Please retain it attentively for future reference.
Please check if the power receptacle is earthed
reliably before usage to guarantee your safety.
The manufacturer is not responsible for any
risks occurred owing to disobey these
stipulations.
Contents
Names of the parts.............the 2
Safety precautions .......................1
Installation and adjustment ..................3
before washing .............7
Put in the laundries .........................8
Usage of the detergent .......................9
Use the operation buttons ................10
Close the top lid ........................14
Finish washing ............................14
Disposal after washing ....................15
Packing list ...................................17
Specifications.........................the back cover
cover
nd

Advertisement

Table of Contents
loading

Summary of Contents for Haier XQB50-10

  • Page 1: Table Of Contents

    XQB50-10 Full Automatic Washing Machine Please read this manual carefully before using. Please retain it attentively for future reference. Please check if the power receptacle is earthed reliably before usage to guarantee your safety. The manufacturer is not responsible for any risks occurred owing to disobey these stipulations.
  • Page 2: Before Using

    Names of the parts Honourable users, Thank you for choosing our products. Our products integrate high-tech, precision,frontier science.To facilitate using it, please read this manual carefully and operate this machine according to it. Top lid B Detergent box (Installed by user) Lint filter Control panel Filter cover...
  • Page 3: Safety Precautions

    Safety precautions Please plug the plug on special 220V AC receptacle.Be sure to use single-phase tow pins receptacle.Ensurethe earthing prong of the power receptacle is earthed reliably.Use leakage protector if possible. Do not damage the power cord,bend ,extend,twist,bind or alter it by force.Do not press or nip it with weight.If the power cord or the power plug is bad, or the power plug becomes flexible,to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department.
  • Page 4 Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children.Do not let the children climb the washing machine. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.
  • Page 5: Introduction Of The Special Functions

    Special functions "Hand scrub" wash: The drum and pulsator rotate in opposite directions to form a washing water flow similar to hand scrubbing movement, and meanwhile the drum inner wall also take a share in washing, which obviously increase the washing intensity. Open-cover alarm function During washing cycle except the processes of water filling and draining, the washing machine will stop operation and automatically alarm if the...
  • Page 6: Usage Of The Drain Hose

    How to change the direction of the drain hose 1.Lean the machine down gently with the front surface facing the ground. Loosen the eight screws by a cross screwdriver. Back Front 2.Pull out the drain hose from the groove at the right side.
  • Page 7: Install The Water Inlet Hose

    Install the water inlet hose Confirm the water tap Water tap,suitable Outlet end surface It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage.
  • Page 8: Connection Between The Water Inlet Hose And The Washing Machine

    Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer.
  • Page 9: Using Process

    1 Preparation before washing Pay attention to followings before washing the laundries Confirm Clear the pocket. there's special Take out the requirment for coins , sand, the laundries. hairpins etc. a.Please check if the laundries are applicable for washing. b.Separate those not colorfast from other laundries. c.For laundries not waterabsorbing,please put them into water with hands.
  • Page 10: Put In The Laundries

    2 Put in the laundries Reference weight of the laundries: working suit up,down cotton,about 1120g blanket cotton,about 900g pajamas shirt cotton,about 300g undershirt cotton,about 180g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time.
  • Page 11: Usage Of The Detergent

    3 Put in the detergent Inlet box of the detergent How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color.
  • Page 12: Use The Operation Buttons

    4 Use the operation buttons Description of the function of the buttons Mode and meaning of the indicator light Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode Flashing rapidly: indicate abnormal condition "...
  • Page 13 To indicate remaining reserved time (hrs) during reservation period. To indicate fault symbols for abnormal conditions (see page 16) Page 16 SURPLUS MIN XQB50-10 RESERV ATION The N ixie tube displays the cycle remaining min, during running. tube display time left (minutes).
  • Page 14 "Wash, Rinse and Spin" . If other program is desired, press the button of "Process" to select one or several process of soak, wash, rinse and spin. Refer to the paragraph "Processes selecting". SOAK WASH XQB50-10 RINSE SPIN PROCEDURE RESERV...
  • Page 15: Water Level

    Attention Even there's no water in the tub, the spinning will start after a certain period. Do not use soak process for woolen Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level.
  • Page 16: Close The Top Lid

    Time list of each program (minute) Wash Water Program (min) level 1~10 Standard Jeans 1~10 Gentle About 4 About 3 Quick About 3 1~10 Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level.
  • Page 17: Disposal After Washing

    Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. When washing, lint filter must be used After using, please clean it in time.
  • Page 18: Trouble Shooting Answer To Questions

    Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
  • Page 19: Packing List

    Common phenomena Phenomena The spinning is intermittent when it starts. Push the "Procedure selection" button to select "Spin", but it doesn't work. There may be some water flowing out of the drain hose in the first use of the machine. While water filling in wash and rinse, the pulsator pauses rotation Wash pauses...
  • Page 20: Specifications

    Rated washing / spinning capacity Water level/Water quantity (about) Max water consumption pressure Rated washing power Rated spinning power Weight Dimension XQB50-10 220V~ 50Hz 5.0kg About 126L (High water level; Standard program) 0.03MPa-0.78MPa 350W 255W About 26kg L 537mm W 520mm H 890mm...

Table of Contents