Delay Start Button - Haier XQB60-91BF User Manual

XQB60-91BF MANUAL

Delay Start Button:

This convenient option lets you delay the start of the wash cycle
between 2 to 24 hours.
• Press the "Delay Start Button" to choose the number of
hours you want to delay the start of the cycle.
• The time will delay by 1 hour for every time you press
the button
• During this cycle if you want to cancel, you must turn the power off and
reselect the option.
End of Cycle Signal:
The machine will beep at the end of the cycle, indicating that the washing is
complete. You will see that "Wash/Rinse/Spin" indicator lights are still "On". The
washer will turn off automatically in about 10 minutes after the completion of the
cycle.
Closing the Top Lid:
As a safety device, you must always have the top lid closed during the
wash process. If you open the top lid while the wash cycle is on, you will
observe the following.
• The filling and the draining of the water will go on.
• The tub will not spin while the lid is open.
• If the unit is in the wash mode it will stop.
Simply close the top lid and press the start/pause button to resume the cycle again.
15
10/22/01 11:42 AM Page 16