Ericsson Dialog 4106 Basic User Manual page 10

Description
10
1 Program
Store frequently called numbers.
2 Message Waiting/2nd
a. A flashing light indicates a waiting message.
b. Key for access to secondary key functions (these functions are
stated on the second line of the corresponding key).
3 Programmable keys
Eight keys for storing frequently called numbers. You can store two
numbers per key.
4 Mute
Switch microphone on or off. See section
page 18.
5 Loudspeaker on/off / Headset key
a. Switch loudspeaker on or off. See section
page 18.
b. Activate headset. See section
6 Last number redial/Pause key
a. Redial last number dialed. See section
page 14.
b. Insert a pause if you have to wait for dial tone. See section
for dial tone" on page
7 R-key
Used for example to make an inquiry, to transfer a call or to
establish a conference, see section
Note: Sometimes it is required to change the flash time for
the R-key, see section
8 Volume control
To adjust the volume.
9 Headset/Loudspeaker switch
a. At the headset position, the loudspeaker key activates a
connected headset. See section
b. At the loudspeaker position, the loudspeaker key activates the
loudspaker. See section
10 Prog On/Off switch
Enable or disable the program key. See section
page 20.
"During Calls" on
"During Calls" on
"Headset" on page
"Last Number Redial" on
13.
"During Calls" on page
"Flash time" on page
"Settings" on page
"Settings" on page
Dialog 4106 Basic/Dialog 4147 Medium
25.
"Wait
18.
26.
20.
20.
"Settings" on