Epson Scan Server User Manual page 26

4. If you are using a DHCP server in your network, you can
assign an IP address to your scanner server PC by selecting
Obtain an IP address from DHCP server and clicking OK.
To manually assign an IP address, select Specify an IP
address then enter the IP Address, Subnet Mask and Default
Gateway. Click OK.
Assigning an IP address to a scanner server PC on Windows
NT 3.51
During the installation of the TCP/IP protocol, the TCP/IP
Configuration dialog box appears and you can set an IP address
for your scanner server PC.
If you are using a DHCP server in your network, you can assign
an IP address to your scanner server PC automatically by
checking Enable DHCP Automatic Configuration box and
clicking OK.
Setting up the Network
1
1-17