Setting The Scanner Server Pc's Ip Address - Epson Scan Server User Manual

Setting the scanner server PC's IP address

To use EPSON scanners in a network environment, you need to
assign IP addresses to the scanner server and client computers.
If EPSON scanners are installed in an internal LAN (Local Area
Network), that is, isolated from the Internet, the following IP
addresses can be assigned to the scanner server.
Note:
If you use IP addresses from these ranges, you will not be able to connect
this LAN to the Internet in the future, otherwise there will be IP address
conflicts.
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
If you plan to use an scanner server PC in a network connected to
the Internet, you should acquire a formal IP address for the
scanner server PC from the Internet organization of your country.
Assigning an IP address to a scanner server PC on Windows
98/95
1. Open the Network dialog box. To do this, click the Start
button on the Windows task bar, select Setting->Control
Panel and double-click the Network in the Control Panel
window.
The Network dialog box appears with Configuration tab on
the top.
Setting up the Network
1
1-13