Installing The Tcp/Ip Protocol (Windows Nt 3.51) - Epson Scan Server User Manual

6. Select TCP/IP Protocol from the list and click OK.
7. Follow the instructions displayed on the screen. After you
finish this step, proceed to the section "Setting the scanner
server PC's IP address" on page 1-13.

Installing the TCP/IP protocol (Windows NT 3.51)

To install the TCP/IP protocol in the Windows NT 3.51
environment, follow the steps below.
Note:
You need the authority of a network administrator to install the TCP/
IP protocol.
1. Double-click the Control Panel icon in the Main group
window.
The Control Panel window appears.
2. Double-click the Network icon in the Control Panel window.
The Network Setting dialog box appears.
Setting up the Network
1
1-9