Output Controls - Native Instruments Deep Freq Manual

• Mod Amt controls the depth of the delay time modulation. The value of this fader is
scaled with the value of the switch below. The unit of the result is milliseconds.
• Mod Amt: Range Selector Modulation depth range selector switch.
Parameter Controls Specific To Witch Mode
• Spread adjusts the delay times of the four delay taps in an incremental way; at a
Spread value of 50, this translates into 0, 50, 100 and 150 ms.
•
Feedback controls Feedback amount.
Parameter Controls Specific To Zombie Mode
Feedback controls Feedback amount.
Parameter Controls Specific To Demon Mode
• Spread adjusts the delay times of the four delay taps in an incremental way; at a
Spread value of 50, this translates into 0, 50, 100 and 150 ms.
• Levels selects a set of values for the output levels of the 4 delay circuits from a look-
up table, think of this as a "level pattern". See below for details on the "patterns".
•
Pans selects a set of values for the output pan positions of the 4 delay circuits from a
look-up table, think of this as a "panning pattern". See below for details on the "pat­
terns."

5.5.3 Output Controls

• FX Mix adjusts the Dry/Wet balance for the entire effect.
• FX Dly L delays the left channel wet signal. Value is in 16th notes.
• FX Dly R delays the right channel wet signal. Value is in 16th notes.
• Wet Gain adjusts the level of the wet signal.
The Ensembles
Modul8
DEEP FREQ - Manual - 43