•
LFO-ENV
blends the modulation source from pure LFO modulation (=0) via 50/50 mix
(= 0.5) to pure Envelope Follower modulation (= 1).
•
LFODly
delays the LFO signal used to modulate the Frequency Spread; unit is 16th
notes
•
LFO Wide:
When "On," the LFO signal is inverted for the right channel, resulting in the
modulation going in opposite directions for the left and right channels.
•
ENV Inv:
When "On," the Envelope Follower signal is inverted and normalised; this
means that instead of going from 0...1, the envelope will go from 1...0.
•
EnvDly
delays the Envelope Follower signal used to modulate Frequency Spread; unit is
16th notes.
5.4.5 Envelope Follower Controls
•
Attack.
Envelope Follower Attack Time.
•
Release.
Envelope Follower Release Time.
•
SC Scale
scales the output of the envelope. Use this to adapt the Envelope Follower
sensitivity to input level.
5.4.6 LFO Controls
•
Shape
selects the LFO waveform.
•
Rate
sets LFO speed in note values if Clock Sync Mode is on.
•
Clock Sync
activates Clock Sync mode, syncing LFO speed to song tempo & timeline.
•
Speed
sets LFO speed in Hz if Clock Sync Mode is off.
5.4.7 Output Controls
FX Mix
adjusts the Dry/Wet balance for the entire effect.
The Ensembles
Spreadbands
DEEP FREQ - Manual - 39