Native Instruments Deep Freq Manual page 25

Content Description
Example Signal Flow Structures
Fig. 4.6 The De-Facto Chimp KORE Controller Page.
This patch starts out with the input signal passing through an instance of the SSFX Plagia­
rism ensemble running in 16 BPF mode. We are then applying a compressor to the filtered
signal to get it back into a predictable level range and feed it into a granular pitch-shifter
delay under step-sequencer control—the sequencer is switching the reverse mode of the
granular delay on and off, while also switching it in and out of the signal path. In the next
processing stage, the signal is sent to a parallel path consisting of a sequencer controlled
gate, which is triggered for the duration of a quarter note on the beginning of each bar, a
feedback delay, an LFO-controlled Wah-Filter and an auto-panner where panning is modu­
lated by another LFO, kind of like you'd occasionally open the send to a tape delay when
producing dub music, but automated. This parallel path is then mixed in and the result is
sweetened with a little spring reverb before hitting another compressor, the dry/wet mixing
stage, a low-cut filter and a limiter.
DEEP FREQ - Manual - 25