Timer Recording - Daewoo SG-9J00 Instruction Manual

DC-G8J21D-RR/O 2008.5.19 2:16 PM ˘ ` 30

Timer Recording

I For timer recordings, clock, date, and stations must be set correctly.
I Load a cassette with its safety tab in place and with sufficient free space for the recording.
Normal timer recording
Press "SETUP", choose "TIMER PROGRAM". Press OK.
1 Choose a free programme location. Press OK.
You will be asked if you want to record "ONCE", "WEEKLY" or
"DAILY".
Please decide and confirm with OK.
Type in one after the other:
2
• The programme location number;
• the time the broadcast starts,
• the time the broadcast ends,
• the day of the broadcast, if it is not today.
• Select LP if you wish to make a very long recording .
If you wish to make changes:
Move to the position you want to change using the [œ œ / √ √ ]
3
buttons. Change the settings using the [PR+/- ] or [number]
buttons.
If all settings are ok, press [œ œ or √ √ ], until you see
"OK : CONFIRM" in the bottom line.
Confirm.
Switch your player off.
• Wait a few seconds after typing a one-digit-number.
• If you have made a mistake, move to the position you want to change using the [œ œ / √ √ ]
buttons and change the setting.
• If programme timings overlap, the machine will give a warning message. If you don't adjust
the times, the machine will record the first programme completely then continue with the
second one.
• If there is no sufficient free space for the recording on the cassette the video switches
automatically to "LP" for double recording capacity.
• The recorder will eject cassettes which have the safety tab removed.
• The player will be powered on and record the program at the set time.
• In case the player is powered on after setting of timer recording, the player cannot record in
VCR mode but can record in DVD mode.
30 30
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
PR+/-:SELECT
OK:CONFIRM SETUP:END
TIMER PROGRAM (ONCE)
PR --
START TIME --:--
END TIME --:--
START DATE --/--
TAPE SPEED SP
PR+/-:SELECT(AV)
0-9 :SETUP(PR)
/➝:CORRECT SETUP:END
TIMER PROGRAM (ONCE)
PR 01
START TIME 18:10
END TIME 20:30
START DATE 15/08(FRI)
TAPE SPEED LP
PR+/-:SELECT(AV)
0-9 : SETUP (PR)
/➝
:CORRECT
OK:CONFIRM SETUP:END