Table of Contents
Advertisement
Restore Defaults
If you wish, you can reset the DVD Recorder+VCR to its original factory
settings.
1
Press [SETUP].
2
Use [œ/√] to select 'Restore Defaults'.
3
Press [ENTER].
4
The Initialize menu will appear. Use the [.../†] buttons to select
'Yes' and press [ENTER].
• Some options cannot be reset, including Parental Controls, Password, and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the
country, language, channel, and clock settings again.
32
Initial Setup
Restore Defaults
If you select this function all
settings will be removed and
Are you sure you want to restore
the product will be set into
default settings?
initial (factory) mode.
Yes
No
Instructions
Enter-Confirm Setup-Exit
Move ...†
On-Screen Display Overview
On-Screen Display Overview
The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded
disc or tape. To access the On-Screen Display (or OSD), press [DISPLAY].
Displaying Disc Information
To display information about the currently loaded disc or tape:
On-screen display operation
1
Press [DISPLAY] repeatedly to display/change the information displayed on-screen.
2
To remove the on-screen display, press [DISPLAY] repeatedly until it disappears.
See the descriptions below for detailed explanations of the on-screen displays for each media type.
• Some discs may not provide all the features shown in the on-screen display examples.
Temporary Feedback Icons
Action prohibited or not available
Changing TV Channels
If no disc is playing, you can change TV channels using the [0-9] or [PR+/–] buttons on the remote control or
[PR+/–] buttons on the front panel.
Changing the TV Audio Channel
You can change the TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO Audio Signal
Stereo
Mono
Stereo
• BIL Audio Signal
BIL I
BIL II
(BIL Off)
BIL I
• MONO Audio Signal
Mono
The current audio channel is displayed on-screen.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
33
Advertisement
Table of Contents
Troubleshooting
