Removing The Battery; Removing The Versa Bay Iv Module - NEC Versa S900 Disassembly Manual

Removing the Battery

Perform the following steps to remove the battery:
1. Make sure the notebook is powered off.
2. Close the lid of the notebook
3. Turn the unit upside down
4. Unlock the battery and slide it out of its place as shown here (Fig. 1 ).

Removing the Versa Bay IV Module

To remove the Versa Bay IV module, first remove the battery (see
then perform the following steps:
1. Push the Versa Bay IV Lock and hold it in position as shown in (Fig. 2 ).
2. Pull the Versa Bay IV module out of the system.
Fig. 1 Removing the Battery
Fig. 2 Removing the Versa Bay IV Module
NEC Versa S900 Disassembly Manual
Removing the Battery),
Page 5