Deassigning A Logical Disk; Unbinding A Logical Disk; Unbinding A Pool Or Rank; Binding A Pool Or Rank - NEC Storage Manager User Manual

Chapter 5 Operation Procedures
5 . 3 . 1
5 . 3 . 1
5 . 3 . 1
Deassign a logical disk from the LD Set. For specific procedures, refer to 10.3.3 "Deassigning a Logical Disk".
5 . 3 . 2
5 . 3 . 2
5 . 3 . 2
Unbind a logical disk. The data saved in logical disks thus unbound are lost; be careful about this. Unbinding
procedures differ depending on the disk array.
- Disk arrays with pool
S400/S1400/S2400/S2800
- Disk arrays with RANK
Other than S400/S1400/S2400/S2800
For specific procedure, refer to the following sections.
- Refer to 7.2.3 "Unbinding Logical Disks" for disk arrays with pool.
- Refer to 8.2.2 "Unbinding Logical Disks" for disk arrays with RANK.
5 . 3 . 3
5 . 3 . 3
5 . 3 . 3
If necessary, unbind a pool or RANK. Logical disks on the pool or RANK are unbound; be careful about this.
For specific procedure, refer to the following sections.
- Refer to 7.1.3 "Unbinding a Pool" for disk arrays with pool.
- Refer to 8.1.2 "RANK Unbind" for disk arrays with RANK
5 . 3 . 4
5 . 3 . 4
5 . 3 . 4
If you have unbound the pool or RANK, re-bind another pool or RANK.
For specific procedure, refer to the following sections.
- Refer to 7.1.1 "Binding a Pool" for disk arrays with pool.
- Refer to 8.1.1 "RANK Bind" for disk arrays with RANK.
D e a s s i g n i n g
D e a s s i g n i n g
D e a s s i g n i n g
U n b i n d i n g a
U n b i n d i n g a
U n b i n d i n g a
U n b i n d i n g a
U n b i n d i n g a
U n b i n d i n g a
B i n d i n g a P o
B i n d i n g a P
B i n d i n g a P
a L o g i c a l D
a L o g i c a l D
a L o g i c a l D
L o g i c a l D i s
L o
g i c a l D i s
L o g i c a l D i s
P o o l o r R A
P o o l o r R A
P o o l o r R A
o l o r R A N K
o o l o r R A N K
o o l o r R A N K
III-8
i s k
i s k
i s k
k
k
k
N K
N K
N K