NEC Storage Manager User Manual page 110

Chapter 7 Disk Array Configuration Setting
(6)-3 Specifying the number of logical disks and the logical disk capacity
Check-marking on [Specify both the number of LDs and LD capacity] on the "Binding Method" screen and
clicking the [Next] button displays the "Specify Number of LDs and LD Capacity" screen.
Figure 7-37 Specifying the Number of Logical Disks and Logical Disk Capacity
Number of LDs:
Set LD capacity:
[Next] button:
[Back] button:
[Cancel] button:
Specify the number of logical disks according to (6)-1.
Specify the capacity of the logical disks according to (6)-2.
Displays the "Setting Detail Parameter for LD Binding" screen.
Displays back the "Binding Method" screen.
Displays a confirmation to ask whether you want to quit the wizard, then the wizard closes if
agreed.
IV-44