NEC Storage Manager User Manual page 283

(b) Display Selection Combo Box
Using the following keywords makes it possible to narrow down the display of logical disks in the [Candidate LD
List].
Selection Information
"LD Set Name"
(Ex. "NX:UNIX_Server01")
"Platform: *" (Ex. "NX: *")
" : *"
"**h-**h (*)"
(Ex. "04h-00h (Server01)")
"Preserve Group"
"ALL"
(c) Various Operation Buttons
Operation buttons shown below can be used for logical disks in the [Candidate LD List].
Each button is enabled under defined conditions. For details, refer to the explanation of operation.
Logical Disk [Add] button
Logical Disk [New Setting] button
All Selection check box
Furthermore, LD Set related operation buttons shown below can be used regardless of logical disk selection.
LD Set [New] button
LD Set [Delete] button
LD Set [Link Path] button
Right button after LD Set selection
Table 10-2 Display Selection of Logical Disk
Displays only logical disks which have already been assigned to the LD Set
Displays only logical disks of the Platform
Displays only logical disks whose Platform has not been set
Displays only logical disks that are assigned to ports in the Port mode.
Displays logical disks in the Preserve Group.
Target logical disks include logical disks with no special purpose settings,
logical disks set in pairs for replication, logical disks for snapshots (BV only
displayed. SV and SDV are not displayed), and logical disks set as
link-volume.
Displays all logical disks in the [Candidate LD List].
(Default settings)
IV-217
Chapter 10 Access Control Operations
Display of Logical Disks