NEC Storage Manager User Manual page 194

Chapter 8 Disk Array Configuration Setting (S100/S1100/S1200/S1300/S2100/S2200/S2300)
(6) Confirm LD Batch Binding screen
Click the [OK] button after entering the required parameters into the LD Batch Bind screen described in (5) to
display the confirmation screen shown in Figure 8-24.
If there are no problems with the setting information on batch binding, click [Yes]. The RANK and LD binding
will start.
(A)
(B)
(C)
(D)
(A) Information About PD
PD Group Number:
Number of Spares:
Number of Unused PDs: Number of PDs unused for binding
For batch binding, the number of PDs for RANK Bind is any of 2, 5, 7, and 9. Therefore, depending on
specifying the physical configuration and "Setting RANK", "Unused PD" may be present.
Figure 8-24 Confirm LD Batch Binding Screen
PD group number to bind
(total) Number of spares to bind
IV-128