(4) Specifying the way of binding the logical disks
Clicking the [Next] button on the "Confirmation for Pool Binding Parameter" screen displays the "Binding
Method" screen.
Specify one of the following ways of binding the logical disks:
•
Only specify the number of LDs
Specify the number of logical disks to bind per pool.
•
Only specify LD capacity
Specify the capacity of each of the logical disks to bind per pool. You can specify a recommended capacity,
set the capacity same with that of a logical disk already bound, or directly designate any value for the
capacity.
•
Specify both the number of LDs and LD capacity
Specify any desired values for the number of logical disks and the capacity of one logical disk.
Figure 7-60 Specifying the Way of Binding Logical Disks
IV-67
Chapter 7 Disk Array Configuration Setting