Configuring Wpa, Wpa2, Or Wpa + Wpa2; Using Push 'N' Connect (Wps) To Configure Your Wireless Network - NETGEAR MBRN3000 User Manual

Mobile broadband wireless-n router
Hide thumbs Also See for MBRN3000:
Table of Contents

Advertisement

Mobile Broadband Wireless-N Router MBRN3000
points in your network. Enter 10 hexadecimal digits (any combination of 0
A
F).
Select which of the four keys will be the default.
7.
Data transmissions are always encrypted using the default key. The other keys can be
used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA
authentication is selected.
Click Apply to save your settings.
8.

Configuring WPA, WPA2, or WPA + WPA2

Both WPA and WPA2 provide strong data security. WPA with TKIP is a software
implementation that can be used on Windows systems with Service Pack 2 or later; WPA2
with AES is a hardware implementation; see your device documentation before implementing
it. Consult the product documentation for your wireless adapter for instructions for configuring
WPA settings.
If you use a wireless computer to configure wireless security
Note:
settings, you will be disconnected when you click Apply. If this
happens, reconfigure your wireless computer to match the new
settings, or access the router from a wired computer to make further
changes.
To configure WPA or WPA2 in the router:
Log in to the router as described in
1.
Select Wireless Settings from the main menu.
2.
On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your
3.
choice.
For WPA-PSK or WPA2-PSK, enter the passphrase.
4.
To save your settings, click Apply.
5.
Using Push 'N' Connect (WPS) to Configure Your
Wireless Network
To use Push 'N' Connect, your wireless computers or devices must support Wi-Fi Protected
Setup (WPS). Compatible equipment usually has the
configure the network name (SSID) and set up WPA/WPA2 wireless security for the router
and the wireless computer or device at the same time.
Some considerations regarding WPS are:
"Logging In to Your Router"
WPS symbol on it. WPS can
Chapter 2: Wireless Network Configuration
9, a
f, or
on page 9.
| 19

Advertisement

Table of Contents
loading

Table of Contents