Removing The Lcd Panel - Packard Bell NEC Versa E680 Disassembly Manual

Removing the LCD Panel

To remove the LCD panel, first remove the LCD module (see
then perform the following steps:
1. Use pin to remove rubber cover on the LCD module as shown in Fig. 25
Fig. 25 Removing the rubber covers & screws on the LCD Module
2. Release the LCD Bezel carefully and put it aside as shown in Fig. 26
Fig. 26 Removing the LCD Bezel
NEC Versa E680/PB EasyNote E5 Disassembly Manual
Removing the LCD Module),
M6x2.5 Black
Page 20