Removing The Memory Module - Packard Bell NEC Versa E680 Disassembly Manual

Removing the Memory Module

To remove the Memory Module, first remove the battery (see
perform the following steps:
1. Release the one screw retaining the memory module cover.
Fig. 6 Removing the screw retaining the memory module slot cover
2. Unclip memory module as shown in Fig. 7
3. Remove the memory module from its slot and put it aside.
Fig. 7 Removing the memory module
NEC Versa E680/PB EasyNote E5 Disassembly Manual
Removing the Battery), then
M3.5x2 Black
Page 8