Removing The Lcd Panel - Packard Bell EasyNote H5 Disassembly Manual

Removing the LCD Panel

To remove the LCD panel, first remove the LCD module (see
then perform the following steps:
1. Use a pin to remove the rubber cover on the LCD module as shown in Fig. 15
2. Remove all screws as shown in Fig. 15
Fig. 15 Removing the rubber covers & screws on the LCD Module
NEC Versa M440/PB Easy Note H5 Disassembly Manual
Removing the LCD Module),
A = M2.5x5 Silver
B = M2x6 Silver
Page 13