Child Lock - Sanyo CE28WN3-B Instruction Manual

Externals Menu
This menu includes options referring to SCART connections.
Audio 1 OUT/Audio 2 OUT : If your TV set receives a Dual broadcast
signal, this menu allows you to select the desired audio output for the
relevant connector situated at the rear of the set.
For instance, if a hi-fi system is connected to the TV set, the selection
results would be as follows:
A & A : You hear the language broadcast on channel A on both
speakers.
B & B : You hear the language broadcast on channel B on both
speakers.
A & B : You hear each language broadcast A on speaker A and
language broadcast B on speaker B.
S-VHS Video : If you have an S-VHS video cassette recorder, you will
obtain optimum picture quality by connecting it to the
AV2 connector with an appropriate cable and enabling
this option.
To Enable or Disable S-VHS on Scart 2
Access Menu->Externals->AV2->S-VHS
13:48:54
21
21
NICAM
NICAM
DUALA
DU ALA
10
O THER FUNCTIONS
O THER FUNCTIONS
A&A
A A
B&B
B B
A&B
A B
More Menu
Access the Main Menu and select More, the following options appear:
Clock : This sub menu allows you to set the
Menu
>
Sound
>
Picture clock, alarm and timers.
>
Externals
>
More
>
More
Sintonía
> Only the remote control unit numeric keys are
Clock
>
Sintonía Bloq.infantil Clock
Time set valid for these functions.
Idioma
Alarm set
Timer ON
Timer OFF
You must always enter four digits when setting
the time in hours and minutes (hh:mm).
Any of the four options in this sub menu can
be reset by pressing the
Time Set : Lets you check or set the
current time, which is kept current if the TV
set is not turned off using the mains
--:--
Time set
1 2 3
ON/OFF switch.
4 5 6
The time is automatically set if there is a
7 8 9
teletext signal. If there is not a text signal or
that time is incorrect you can enter the time
0
manually using the numeric buttons e.g. for
8.30 am enter 0830, for 8.30 pm enter 2030.
A manually set time is only cancelled when
the TV is switched off with the Mains On/Off
button, and overrides the teletext signal.
Alarm set 12:00
Alarm Set : Using the remote control unit
numeric keys, you can set the TV alarm
function. When the alarm is enabled a
sequence of beeps is heard, gradually
increasing in volume.
To stop the alarm, press any button on the
remote control unit.
Timer On : This sub menu lets you set the
time you want the TV set to turn on when in
Standby mode, using the remote control
unit numeric keys to set the time.
STAND-BY
Timer Off : This sub menu lets you set the
time you want the TV set to switch into
12:00
Timer ON
Standby mode, using the remote control
unit numeric keys to set the time.
The red pilot light turns soft green if the Alarm
or Timer Off options are enabled and the TV
set is ON.
The red pilot light turns bright green if the
Alarm or Timer On options are enabled and
the TV set is in Standby mode.

Child Lock

Menu
>
Sound
>
Picture
>
Externals
>
More
>
More
> >
Clock
Child lock
Child lock ON
VIDEO AUDIO
L R
button.
Child Lock : Can be enabled or
disabled (ON/OFF). When enabled, it
locks out all local keypad operations.
+
F P