Time Display - Sanyo CE28WN3-B Instruction Manual

Alternative Program
Press the button and the TV set will alternately select the current
P P
programme position and the previous programme position viewed.
This function has two sound mute stages. Press the
the sound from the speakers will be reduced, press it again and it will
be muted completely.
Press the button again to switch the sound back on.
When the / button is pressed, the sound mute is
cancelled.
Press the button once, the programme information such as
current programme number, stereo status, picture format, remaining
timer if set.
Store/Restore Default Settings
The following function levels can be altered and then stored as user
level default settings, Brightness, Contrast, Colour and Sharpness.
You can store 3 different user levels which can be recalled at a later
date.
F /OK
Contrast
12
O THER FUNCTIONS
O THER FUNCTIONS
23
6
Mute
button once,
Recall
13:48:54
04 CH4
NICAM STEREO
Using the Menu button or the
OK button select a Picture setting
eg. Contrast. Adjust the level using the
button and whilst the display is still
on the screen press the
Contrast
Contrast
Restoring the saved settings
Press the
(Factory settings), User level 1, User level 2 or User level 3.
Note : Settings cannot be restored while a picture setting is displayed
on-screen.
In the TV mode, if the receiving programme has a teletext service
when the button is pressed, the present time will be displayed on
the screen for 5 seconds.
AUTO
/
button.
LEVEL? (1-2-3)
You must now select which User level
1
setting to store these settings, by
pressing the numeric button 1, 2 or 3.
STORED USER LEVEL 1
button repeatedly to restore either Normal level
NORMAL LEVEL

Time Display