Programme Selection; Auto Shut Off - Sanyo CE28WN3-B Instruction Manual

Mains ON/OFF
To turn the TV set ON, press the Mains ON/OFF
power indicator illuminates red to show the power is on.
To turn the TV set OFF, press it again.
If no picture appears but the power indicator is on, press the
button, P P or 0-9 button on the Remote Control Handset as
the TV set is in the Standby mode.
Standby
To turn the TV set into standby mode, press the
power indicator illuminates more brightly.
To turn the TV set ON from standby mode, press any of the
following buttons: button, P
In the Standby mode the TV set is still partially powered, this is
denoted by the red Standby/Power indicator illuminating more
brightly than in Power mode.
The Mains ON/OFF switch must be in the ON position before
the using remote control transmitter.
NOTE: It is not possible to turn on with the Mains
!
ON/OFF switch from the standby mode.
Be sure to set the Mains ON/OFF
!
position, if a power failure occurs while viewing.
If you found a power indicator flashing, please turn the
!
TV set off completely with the Mains ON/OFF switch
and contact our Service desk. This warning is a sign to
let you know that the power protection function of this
TV set is now operating.

Auto Shut Off

This TV set will automatically switch into the standby mode, 10
minutes after a signal is no longer received. The time until the set
will switch off is displayed on the screen.
OFF:10
If the aerial is removed the TV set will automatically switch into
the standby mode after 10 minutes.
When the TV set is switched on by using the On-timer function
with no signal being received, the auto-shut off function will be
ignored.
GENERAL OPERA
GENERAL OPERA
switch. The
button. The
/ P , 0 to 9 Numeric buttons.
switch to the off
TION
TION
Controls
TV/
F /OK
MENU/
i
P
1 2 3 WIDE
P P
4 5 6
7 8 9
-/-- 0 CS
?
X TXT/TV
SURROUND BASS
A . B
VIDEO AUDIO
L R

Programme Selection

Direct Programme Selection
For selection of programme position 0 to 9, press the corresponding
numeric button. If the required programme is equal or more than
10, for example 23, first press the -/- - button and enter 2 then 3.
Up/Down Programme Selection
Press the P button to increase the programme position.
Press the P button to decrease the programme position.
P
Programme Up / Down
Level Up / Down
Stand-by
MENU/
i Menu
TV/
TV/AV Selection
0~9
0 to 9 Numeric buttons
-/--
2 Digit button
P P
Alternate
Normalisation/Memory
Sound mute
Recall
+
Black Stretch
Time Display
BASS
Bass
TV local keyboard
Mains ON/OFF
P
Programme Up / Down
Level Up / Down
F
Menu
Memory/Normalisation
R
Right audio
L
Left audio
Video
Headphones
+
F
11:06:33
03 ITV1
AUTO
NICAM STEREO
11:06:33
02 BBC2
AUTO
NICAM STEREO
11:06:33
01 BBC1
AUTO
NICAM STEREO
00
99
P
5