Table of Contents
Advertisement
1054K09.FM
28.10.96
Operation on Telephone Systems
Enter Main Trunk Code (HAKZ)
If your telephone system is being operated as a subsystem on a main telephone system, you
must also program the code for the main telephone system (HAKZ) when first putting it into ser-
vice.
Please also note the operating instructions for your telephone system.
The 0 ... 9 keys as well as the star, pound and signal keys can be used for the HAKZ.
For information on setting the timeout lengths, see „Change Length of Timeout after AKZ /
HAKZ" on page 139.
w #
Push the enter key and the # key.
0
Push the 0.
o
Enter the system code .
Every digit entered replaces one dash on the
display.
!..." Select external telephone line 1 or 2.
z
Push the number redial key.
z
Push the numbr redial key again.
o
Enter the HAKZ (1 - 3 characters); here, 11.
The number redial key must be pushed again -- followed by the next HAKZ -- only in those cases
where multiple HAKZ (up to 3, each with 1 - 3 characters) are to be entered.
Thereafter:
w
Push the enter key.
Main trunk code(s) is / are stored.
Note:
Dial or store all digits which are needed to reach a target. In other words, dial the necessary
codes, area code and the telephone number. The system will add the necessary dialing time-
outs itself (the dialing timeout at time of initialization is 3 seconds).
Gigaset 1054, GBR: A30852-X954-B101-1-7619
Standard Mobile Unit
-
A
0 __ _ _
A
0
A
12
A
A z
A
H z
A
H 11
A
CD
CD
_
CD
CD
CD
CD
CD
C
138
Advertisement
Table of Contents
