Installing/Mounting; Installing The Simatic Iot2000 Sg-Shield - Siemens SIMATIC IOT2000 SG-Shield Operating Instructions Manual

Installing/mounting

4.1

Installing the SIMATIC IOT2000 SG-Shield

Requirement
• The device is disconnected from the power supply.
Procedure
1. Loosen the cover.
Carefully press the blade of a flat screwdriver into the marked cutouts and carefully pull on
the bottom shield cover.
2. Remove the cover.
3. Insert the three plastic mounting clips into the marked drilled holes on the main circuit board.
4. Insert the supplied metal mounting clip into the marked drilled hole on the main circuit board.
SIMATIC IOT2000 SG-Shield
Operating Instructions, 08/2021, A5E50985404-AA
2
3
4
5
1
3
3
4
13