Side Burner Assembly - Frigidaire Electric Patio Grill Use & Care Manual

1. Attach the Side Burner to the grill by
inserting the shelf hooks into the slots on the
side of the grill and pushing down on the shelf
assembly until level with the grill
(See Fig. 19)
2. Lock the Side Burner in place by re-inserting
(2) hex head screws in the front & rear edge
of side burner. (See Fig. 20)
Note: A power screwdriver extension is needed to
insert screw.
3. Attach the Flex Line coming from the side of
the grill to the fitting on the bottom of the
Side Burner. (See Fig. 21)
4. Attach the ignitor wire coming out from the
side of the grill to the side burner ignitor
point. (See Fig. 22)

Side Burner Assembly

9
Fig. 19
Fig. 20
SCREW HOLE
Attach to fitting
Fig. 21
Ignitor
wire
hookup
Fig. 22