Resetting The System - Yamaha DSP-AX863SE Owner's Manual

Use this feature to reset all the parameters of this unit to the initial factory settings.
Notes
• This procedure completely resets all the parameters of this unit including the "SET MENU" parameters.
• The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press C STANDBY/ON on the front panel.
Press C STANDBY/ON on the front panel to
1
set this unit to the standby mode.
Press and hold D TONE CONTROL and
2
then press C STANDBY/ON to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
While holding
TONE CONTROL
down
Rotate the E PROGRAM selector to select
3
"INIT".
Press D TONE CONTROL repeatedly to
4
select "ALL".
y
Select "CANCEL" to cancel the initialization procedure
without making any changes.
Press C STANDBY/ON to confirm your
5
selection and set this unit to the standby
mode.

Resetting the system

STANDBY
/ON
RESETTING THE SYSTEM
105
En