Yamaha DSP-AX863SE Owner's Manual page 36

Av amplifier
Hide thumbs Also See for DSP-AX863SE:
Table of Contents

Advertisement

Optimizing the speaker setting for your listening room (YPAO)
Press 9 ENTER to display the setup results
10
in detail.
AUTO SETUP
. RESULT
SP
DIST:
LVL : -9.0/+6.5dB
>
SET
[ ]/[ ]:Up/Down
[ENTER]:Detail
RESULT
FRONT L;;;;;;;OK
[
[ ]/[ ]:Select
[ENTER]:Return
11
Press 9 l / h repeatedly to toggle between
the setup result displays.
Press 9 k / n to toggle between the parameters in a
results.
Results of the speaker
connection and wiring
(WIRING)
Results of the speaker distance
from the listening position
(DISTANCE)
Results of the setting of each
speaker size
(SIZE)
Results of the parametric
equalizer of each speaker
(EQ)
Results of the speaker output level
(LEVEL)
y
If you are not satisfied with the results or want to manually
adjust each parameter, use "MANUAL SETUP" (see
page 63).
34
En
:
3/4/0.1
4.50/5.30m
CANCEL
WIRING
[
Notes
• The distances displayed in the "DISTANCE" results may
be longer than the actual distance depending on the
characteristics of your subwoofer.
• In the "EQ" results, different values may be set for the
same frequency to provide finer adjustments.
Press 9 ENTER to return to the top
12
result display.
AUTO SETUP
RESULT
SP
DIST:
LVL : -9.0/+6.5dB
.
>
SET
[ ]/[ ]:Up/Down
[ENTER]:Enter
13
Make sure the pointer is pointing at "SET"
and "CANCEL" and then press 9 l / h to
select "SET" or "CANCEL".
AUTO SETUP
RESULT
SP
DIST:
LVL : -9.0/+6.5dB
.
SET
>
[ ]/[ ]:Up/Down
[ENTER]:Enter
Choices: SET, CANCEL
• Select "SET" to confirm the "AUTO SETUP"
results.
• Select "CANCEL" to cancel the "AUTO SETUP"
results.
Press 9 ENTER to confirm your selection.
14
The following screen appears. Disconnect the
optimizer microphone from this unit to exit from
"SET MENU". The optimizer microphone is
sensitive to heat. Keep it away from direct sunlight
and do not place it on top of this unit.
AUTO SETUP
AUTO SETUP Complete
Disconnect Microphone
PRESS [ENTER]
[MENU]:Exit
y
If you change speakers, speaker positions, or the layout of your
listening environment, run "AUTO SETUP" again to recalibrate
your system.
:
3/4/0.1
4.50/5.30m
CANCEL
:
3/4/0.1
4.50/5.30m
CANCEL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents