Option Menu - Yamaha DSP-AX863SE Owner's Manual

5 OPTION MENU

Use this menu to adjust the optional system parameters.
5 OPTION MENU
.
A)DISPLAY SET
B)VIDEO SET
C)MEMORY GUARD
D)INIT. CONFIG
E)HDMI SET
[ ]/[ ]:
[ENTER]:
■ Display settings
Note
Use "VIDEO" of "INIT" in "ADVANCED SETUP" to set "OSD
SHIFT" to the factory presets (see page 97).
A)DISPLAY SET
.
DIMMER;;;;;;;;;;;;0
OSD SHIFT;;;;;;;;+5
OSD-SOURCE;;;;;;30S
OSD-AMP;;;;;;;;;30S
FL SCROLL;;;;;;CONT
[ ]/[ ]:
[p]/[[]:
Dimmer DIMMER
Use this feature to adjust the brightness of the front panel
display.
Control range: – 4 to 0
Control step: 1
• Press 9 l to make the front panel display dimmer.
• Press 9 h to make the front panel display brighter.
OSD shift OSD SHIFT
Use this feature to adjust the vertical position of the OSD.
Control range: –5 (downward) to +5 (upward)
Control step: 1
Initial setting: 0
• Press 9 l to lower the position of the OSD.
• Press 9 h to raise the position of the OSD.
Source feature OSD display time OSD-SOURCE
Use this feature to set the amount of time to display the
iPod menu in the OSD after you perform a certain
operation.
Choice
ON Displays the OSD unceasingly during an
operation.
10S
Turns off the OSD 10 seconds after you perform
a certain operation.
30S
Turns off the OSD 30 seconds after you perform
a certain operation.
Up/Down
Enter
A)DISPLAY SET
Up/Down
Adjust
Functions
Customizing this unit (MANUAL SETUP)
Amplifier function OSD display time OSD-AMP
Use this feature to set the amount of time to display the
status information screen after you perform a certain
operation.
Choice
ON Displays the OSD unceasingly during an
operation.
10S Turns off the OSD 10 seconds after you perform
a certain operation.
30S Turns off the OSD 30 seconds after you perform
a certain operation.
Front panel display scroll FL SCROLL
Use this feature to set the mode to display the iPod menu
(such as song title or channel name) in the front panel
display.
Choice
CONT Continuous mode.
Select this to display the operation status in the
front panel display in a continuous manner.
ONCE Scroll-once mode.
Select this to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.
■ Video settings
B)VIDEO SET
Note
Use "VIDEO" of "INIT" in "ADVANCED SETUP" to set the
parameters in "VIDEO SET" to the factory presets (see page 97).
B)VIDEO SET
. VIDEO CONV.;;;;;;ON
HDMI RES.;;;;*THRGH
[ ]/[ ]:
[p]/[[]:
Video conversion VIDEO CONV.
Use this feature to set whether to convert the video signals
input at the VIDEO, S VIDEO, and COMPONENT
VIDEO jacks.
Choice
ON
Converts composite, S-video, and component
video signals interchangeably and up-converts
composite, S-video, and component video
signals to HDMI video signals.
OFF Does not convert any signals.
Functions
Functions
Up/Down
Select
Functions
79
En