Yamaha DSP-AX863SE Owner's Manual page 10

Quick start guide
Step 3: Press SCENE 1 button
Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set "SP IMP." to
"6Ω MIN" before using this unit (see page 27). 4 ohm
speakers can be also used as the front speakers (see
page 95).
1
Turn on the video monitor and then set the
input source selector of the video monitor to
this unit.
Press J SCENE1 button.
2
This unit is turned on. "DVD Movie Viewing"
appears in the front panel display, and this unit
automatically optimize own status for the DVD
playback.
y
The indicator on the selected SCENE button lights up while
this unit is in the SCENE mode.
Rotate B VOLUME to adjust the volume.
3
Note
When you change the input source or sound field program,
the SCENE mode is deactivated.
8
En
■ About SCENE function
Just by pressing one SCENE button, you can turn on this
unit and recall your favorite input source and sound field
program according to the SCENE template that has been
assigned to the SCENE button. The SCENE templates are
built combinations of input sources and sound field
programs.
y
If you connect a Yamaha product that has capability of the
SCENE control signals, this unit can automatically activate the
component and start playback. Refer to the instruction manual of
the DVD player for further information.
■ The default assigned SCENE templates
Default The name of the SCENE template
SCENE and its description
button
DVD Movie Viewing
SCENE
1
– input source: DVD
– sound field program: Sci-Fi
For when you want to enjoy a movie from the
connected DVD player.
Music Disc Listening
SCENE
2
– input source: DVD
– sound field program: 2ch Stereo
For when you want to listen to a music disc from
the connected DVD player.
*1
SCENE TV Viewing
3
– input source: DTV/CBL
– sound field program: Straight
For when you want to watch a TV program.
SCENE Radio Listening
4
– input source: TUNER
– sound field program: 7ch Enhancer
For when you want to listen to a music program
of the FM/AM/DAB radio station.
Notes
*1
You must connect a cable TV or a satellite tuner to this unit in
advance. See page 22 for details.
*2 You must connect an FM/AM/DAB tuner to this unit in
advance. See page 23 for details.
y
You can change the assigned SCENE template for the SCENE
buttons. See page 36 for details.
*2