Connecting Ethernet Ports - Zhone zNID-GPON-2403 Hardware Installation Manual

Connecting Ethernet ports

The zNID-24xx series models have up to 4 Gigabit Ethernet ports.
Connect Ethernet ports
The zNID provides RJ 45s for Ethernet connections. Ethernet connections can
be used to deliver any packet services including IPTV, data, and VoIP.
For Ethernet services, connect a Category 5 or a Category 6 cable to an RJ45
interface as shown in Figure
1 Locate the premises' Ethernet LAN cable.
2 If the cable is not terminated, follow local practices to attach an RJ-45
connector.
3
Plug the Ethernet cable into the appropriate RJ-45 Ethernet port.
Figure 13: The RJ-45 Ethernet ports.
4
Repeat steps 1-3 as needed to connect additional Ethernet cables.
13.
zNID Hardware Installation Guide
Connect to network
43