Table of Contents
Advertisement
Connecting the Cables
1. Install the USB driver as shown in the following pages.
2. Restart your PC.
3. Connect your PC to the USB jack of the modem.
4. Connect the LINE jack to your ADSL line, or, if you will use a phone at this location:
•
Unplug the phone cable from the phone jack of your phone and plug it into the WALL
jack of the Y-Line Filter.
•
Plug the ADSL cable into the ADSL jack of the Y-Line Filter and the LINE jack of the
modem.
•
Plug another phone cable into the PHONE jack of the Y-Line Filter and your phone.
Warning: DO NOT CONNECT THE USB CABLE INTO THE UNIT UNTIL
THE DRIVER INSTALLATION IS COMPLETE.
4
November 2005
6205-A2-ZZ40-20
Advertisement
Table of Contents
