Carry Handle; Extension Tube; Dirt Container & Filter: Removal & Replacement - Vax Turbo Force Ultra V-006U Instruction Manual

Vax V-006 D5 BF 7/1/05 12:13 PM
A
B
C
Fig.4/5
5. Accessories
IMPORTANT: The vacuum cleaner must be in the
upright position to raise the brushbar. The brushbar
height adjust must also be at its highest position.
1. Remove the hose from the tool caddy (Fig.5/1).
Fig.5/1
2. Choose any of the handy on-board accessories
or use the hose alone. Simply push the
attachment firmly onto the end of the extension
tube or hose handle. To remove the accessory,
twist and pull apart gently (Fig.5/2).
Fig.5/2

Extension Tube

If additional length is needed, use the extension tube
and/or crevice tool. Pull the crevice tool out of the
extension tube or hose handle. To remove the tool,
twist and pull apart gently.
NOTE: The crevice tool is stored inside the extension
tube (Fig.5/3).
Fig.5/3
Page 7
How to Operate/Accessories/Dirt Container: Removal & Replacement
Crevice tool: for crevices, corners and cracks etc.
Dusting brush: for delicate surfaces and skirting
board.
Stair tool ( V-006U only): for stairs, upholstery and
curtains. Twist the head tool for best contact with
stair treads and risers (Fig.5/4).
A
Fig.5/4

Carry Handle

Use the carry handle on the back of the vacuum
cleaner to move the cleaner from room to room
(Fig.5/5).
NOTE: Check that the dirt container is securely in
place before lifting the vacuum cleaner.
Fig.5/5
6. Dirt Container & filter:
Removal & Replacement
WARNING: To reduce the risk of injury from moving
parts, unplug before servicing.
NOTE: Unplug the vacuum cleaner before changing
filter.
NOTE: For best performance, replace filter annually.
1. Press the latch above the dirt container and
remove the dirt container from the vacuum
cleaner (Fig.6/1).
Fig.6/1
7