Carry Handle; Extension Tube - Vax VPUP2000P User Manual

Operation
Accessories
IMPORTANT: The vacuum cleaner must be in the
upright position to raise the brushbar. The brushbar
height adjust must also be at its highest position.
1. Remove the hose from the tool caddy.
2. Choose any of the handy on-board accessories or use
the hose alone. Simply push the attachment firmly onto the
end of the extension tube or hose handle. To remove the
accessory, twist and pull apart gently.

Extension Tube

If additional length is needed, use the extension tube and/or
crevice tool. Pull the crevice tool out of the extension tube or
hose handle. To remove the tool, twist and pull apart gently.
NOTE: The crevice tool is stored inside the extension tube.
www.vax.com.au
Crevice tool: for crevices, corners and cracks etc.
Dusting brush: for delicate surfaces and skirting board.
TurboTool: for excellent pick up of pet hair and for stair and
upholstery cleaning. Attach to hose tube or extension tube
as per all other accessories. For best results, use backward
strokes on the surface you are cleaning.

Carry Handle

Use the carry handle on the back of the vacuum cleaner to
move the cleaner from room to room.
NOTE: Check that the dirt container is securely in place
before lifting the vacuum cleaner.
7