Carry Handle - Vax Rapide Supreme V-023 Instruction Manual

Vax V-023 D6 mm.qxd
Storage/Brush Removal & Replacement

Carry Handle

Grasp the handle on the back of the washer to move
it from room to room (Fig.8/2).
Fig.8/2
BEFORE STORING CARPET WASHER:
1. Empty and rinse clean water tank and dirty
water tank.
2. Replace empty clean water tank and dirty water tank.
3. Ensure that brushes and underside of unit are fully
dry prior to storing
wood surface.
NOTE: Do not store or transport unit with a full clean
water tank or dirty water tank.
9. Brush Removal &
Replacement
Tool required: Phillips screwdriver
WARNING: To reduce the risk of injury from moving
parts, unplug before servicing.
1. Remove the water, switch off and unplug carpet
washer. Flip the cleaner on its side to expose the
nozzle base (Fig.9/1).
Fig.9/1
10
9/8/05 10:34 AM Page 10
on a carpeted
2. To remove the brush access cover, use a Phillips
screwdriver to remove the two (2) screws
(Fig.9/2).
Fig.9/2
3. Lift out the floating brushbar (Fig.9/3).
or
Fig.9/3
4. Replace floating brushbar (Fig.9/4).
Fig.9/4