How To Operate; Floor/Carpet Cleaning - Vax Turbo Force Ultra V-006U Instruction Manual

Vax V-006 D5 BF 7/1/05 12:13 PM
How to Assemble/How to Operate
Fig.3/14
15. To secure the dirt container push the top in place,
there will be an audible click when it is secure
(Fig.3/15).
Fig.3/15

4. How to Operate

Cord Release
Release the power cord by turning the quick cord
release. The cord should be inserted into the cord
guide while vacuuming to keep it out of the way
(Fig.4/1).
Fig.4/1
Adjustment for Different Floor Types
Slide the height adjust lever to match the surface
being cleaned (Fig.4/2).
NOTE: For easiest adjustment, place cleaner in full
upright position.
Fig.4/2
6
Page 6
CAUTION: The brushbar continues to rotate
while the hose is removed or in use, and at all
times while the vacuum cleaner is on. Keep hair,
loose clothing, fingers and all parts of the body
away from the brush area while the vacuum
cleaner is on. The vacuum cleaner must be in
the upright position to lift the rotating brushbar
off the carpet when cleaning above the floor.
Vax recommend that the brushbar height adjust
is turned to its highest position when using the
tools.
On/off Pedal
Plug the cord into the electrical outlet. Turn the
vacuum cleaner on by depressing the foot switch
located on the back left side of the vacuum cleaner
(Fig.4/3). The vacuum cleaner can be turned off by
pressing the on/off switch again.
Fig.4/3
Handle Release Pedal
To release the handle, push the handle release pedal
located on the the lower left side of the cleaner
(Fig.4/4).
Fig.4/4

Floor/Carpet Cleaning

Move the handle to the desired position (A) for storage
and position (B) for normal operation.
De-press the handle release pedal again (C) to clean
under furniture (Fig.4/5).