Page 1
V-009 easy guide Please read carefully before using your V-009. Always fully extend mains cable before use.
Page 2
Important information - Save these instructions Congratulations on the purchase of your V-009 cylinder cleaner. In order to get the best performance from this product, please read and retain these instructions. When using electrical appliances, in order to reduce the risk of fire, electric shock and/or injury to persons, basic safety precautions should be followed, including the following: •...
Page 3
How to use your V-009 Assembling the appliance fig. 1 The telescopic extension tubes can be lengthened by pressing the button and pulling the tubes apart. fig. 2 To attach the flexible hose to the vacuum cleaner, push the connecting end of the flexible hose into the...
Page 4
How to use your V-009 Assembling the easy reach tool system Your V-009 has been equipped with easily accessible tool storage. To assemble this, please follow these instructions. fig. 3 The tool storage system fixing bracket is already in place on the extension tube.
Page 5
How to use your V-009 Adjusting the cleaning tool for carpets & hard floors fig. 5 Hard floor position (tiles, parquet floors, etc) – The cleaning tools brush must be in the lower position. Press on the rocker switch to lower it.
Page 6
How to use your V-009 Fully extend the mains cable and plug it into a standard domestic outlet. fig. 7 Press the foot pedal to start the vacuum cleaner. To stop it, press the pedal again. fig. 8 Press the foot pedal to recoil the power lead.
Page 7
How to use your V-009 fig. 10 If you wish to pause briefly during vacuuming i.e. to move a piece of furniture or a rug, use the special parking position on your vacuum cleaner as shown. Slide the hook attached to the large cleaning tool into the slot on the rear of the appliance.
To change the dust bag Your appliance is equipped with a dust bag. If you notice that the vacuum cleaner seems to be less efficient than usual, check the dust indicator by selecting the maximum power and lifting the vacuum cleaning head off of the floor. If it turns red, change the dust bag.
Page 9
16. Remove the dirty filter assembly from the machine and dispose of the filter medium. Replace with a new filter medium. Return the filter assembly to your V-009. We recommend replacing the air outlet filters every 4-6 months, after the bag has been emptied 5 times, when appearance is soiled or a loss of suction is experienced (whichever is sooner).
Page 10
Dust bag indicator fig. 17 When the indicator turns red or when the suction power reduces substantially, this indicates that you should empty the dust bag. fig. 18 When the bag is not full, the indicator will show blue. Attention: If after emptying the dust bag, the indicator stays red, this could be for several reasons: •...
Page 12
If you have queries or concerns about using your VAX, call the HELP LINE. Calls are charged at the UK national rate. Please make a note of the serial number and model number of your VAX before calling. VAX Limited, Kingswood Road, Hampton Lovett, Droitwich, Worcestershire WR9 0QH, UK Email: enquiry@vax.co.uk - Website: www.vax.co.uk...
Need help?
Do you have a question about the V-009 and is the answer not in the manual?
Questions and answers